Enter the error code and car brand

Vehicle engine and/or automatic transmission

Code: P1007 - The Variable Valve Timing (VVT) control signal is not working within the normal range, which may affect engine performance.

Error code P1007 in Peugeot vehicles points to a problem with the Variable Valve Timing (VVT) control signal, indicating that it's either out of its normal operating range or performing inadequately. The VVT system optimizes engine performance by adjusting the timing of valve operation, and any disruption can lead to noticeable changes in how the engine runs.

Causes of P1007 in Peugeot

There are several potential causes behind this error, such as:

Faulty VVT solenoid or actuator.
Oil flow issues due to dirty or low oil levels.
Wiring or connection problems in the VVT system.
ECU (Engine Control Unit) software errors.
Timing chain wear or misalignment.

Symptoms of Error Code P1007

When this code is triggered, drivers may experience several warning signs, including:

Check Engine Light illumination.
Rough idling or engine misfires.
Decreased fuel efficiency.
Poor acceleration or sluggish performance.
Unusual noises coming from the engine.

Which Peugeot Models Are Most Affected?

Peugeot models equipped with VVT systems are susceptible to this code, particularly those with high mileage or infrequent maintenance. Models like the Peugeot 307, 308, 207, 2007, 406 and 508 are often reported to have this issue due to their engine configurations and age.

The frequency of P1007 in certain models is usually linked to oil maintenance habits. VVT systems rely heavily on proper oil flow, so neglected oil changes or using subpar oil can accelerate wear and lead to malfunctions.

What Parts Should You Pay Attention To?

When addressing this error, focus on inspecting and possibly replacing:

VVT solenoid/actuator.
Oil control valve.
Timing chain and related components.
Wiring harness and connectors.

How Serious Is Error Code P1007?

Ignoring this issue can lead to long-term engine damage and reduced performance. While the vehicle may still run, prolonged driving with a VVT malfunction can increase fuel consumption and cause costly repairs down the road.

Steps to Fix Error Code P1007

Addressing this error requires a step-by-step approach:

Check the engine oil level and condition; top up or replace if necessary.
Inspect the VVT solenoid and replace it if defective.
Examine wiring and connectors for damage and repair as needed.
Reset the error code using an OBD-II scanner and test drive the vehicle.
If the issue persists, consult a mechanic to inspect the timing chain and ECU.

Conclusion

Error code P1007 in Peugeot vehicles shouldn't be ignored. Regular maintenance, especially timely oil changes, plays a crucial role in preventing VVT-related issues. If you're facing this code, addressing it quickly can save you from more serious and expensive engine repairs down the line.

Video for "Error p1007" on YouTube