OBD error code P0087 on Peugeot indicates that the fuel rail pressure is too low. This issue can lead to a loss of power, unstable engine operation, and in some cases, engine stalling. In modern petrol and diesel engines, maintaining stable fuel pressure is crucial for the proper functioning of the fuel injection system, so this code should not be ignored.
DTC P0087 PEUGEOT
Другие марки с кодом ошибки P0087
Causes and Symptoms of P0087 on Peugeot
The main causes of DTC P0087 on Peugeot 308, 3008, 508, Partner, and Expert include fuel filter clogging, fuel pump wear, fuel pressure regulator failure, or fuel line leaks. Occasionally, the code appears due to the use of poor-quality fuel, which leads to system contamination. Symptoms can include poor acceleration, unstable idle, difficulty starting the engine, or stalling under heavy loads.

Resolving P0087 Error on Peugeot
To address the issue, the first step is to check the condition of the fuel filter and replace it if it's clogged. Next, the fuel pump is diagnosed by measuring the pressure and assessing its performance. If necessary, the pump or pressure regulator is replaced. It's also crucial to inspect the fuel lines for leaks. If the P0087 error on Peugeot persists after all checks, further diagnostics of the Engine Control Unit (ECU) and its recalibration may be required.
Conclusion
Drivers should not delay addressing the issue - insufficient fuel pressure can lead to serious fuel injection system malfunctions. Prompt diagnosis and replacement of faulty components can help avoid costly repairs.
- DTC P1748 PeugeotThe EPC (Electronic Power Control) system is malfunctioning, which may affect engine or transmission performance.
- DTC P1007 PeugeotThe Variable Valve Timing (VVT) control signal is not working within the normal range, which may affect engine performance.
- DTC C1380 PeugeotThe ABS (Anti-lock Braking System) block’s recirculation pump has a problem, which may affect how the brake system regulates pressure during braking.
- DTC U1218 PeugeotThe intelligent switching device (controls electronics) is sending incorrect data to the system, which may affect how some electronic features work.




